YouTube video by Ken Hishinuma showing resoling of Danner Mountain Lite boots
Notes
- <$- time(15, 7) explanation of how to position a Vibram unit sole
- starts out larger than the shoe
- focus on positioning the waist
- check that the Vibram logo and lug pattern align
- once positioned, draws a line on the top of the outsole with a silver pen
- 15:43 heats the cement with a single-coil electric stove
- uses a last and lasting post as a cobbler anvil
- two layers of cement to sponge, since it absorbs too much
- careful adhering through the waist
- hammers the outsole down
- screws down the outsole in the waist to prevent delamination
- finishes the edge on a finishing machine, just enough to smooth without abrading the turned-out upper