Renia brand of solvent-based polychloroprene contact cement
cannot bond plastified PVC
toluene- and MEK-free
Instructions
Grind the materials and coat them with Renia - top-fit until you can see a layer of cement. Sometimes, you have to coat leather and other porous materials twice. PE, PP: Touch with an open gas flame. TR (Thermoplastic Rubber): Clean with acetone. Certain TR types need to be halogenated with Rehagol and bonded with Syntic-TOTAL or Colle de Cologne. PUR (Polyurethane): After grinding, press the material with absorbent paper to remove the water. Then coat it with Renia-Primer for PUR and apply the adhesive without delay.
Pot Life
4-6 hours with Renia hardener C
Assembly Time
7-40 minutes Thermoplastic Rubber: 5-15 minutes
Activation
- infrared lamp 176°F for 3 minutes
- shock activation: 3 seconds
Pressure
- 15-60 psi, material dependent
- 15 psi for 60 seconds minimum
- 45 psi for 15 seconds minimum
Thinning
- Don’t use acetone.
- Use Renia Schnellkeber-Verdünner.