GS Eyelets

graduated eyelet system from Stimpson

Each series, denoted by a numeric prefix, corresponds to a set width. Eyelets of the same series can be set with the same tooling sets.

Lengths within each series are graduated in thirty-seconds of an inch.

Sizes

Series Barrel Outside Diameter Flange Diameter Metal Thickness Length Under Flange
2/32 (≈0.063) 3/32 (≈0.094) 4/32 (≈0.125) 5/32 (≈0.156) 6/32 (≈0.188) 7/32 (≈0.219) 8/32 (≈0.250) 9/32 (≈0.281) 10/32 (≈0.313) 11/32 (≈0.344) 12/32 (≈0.375) 13/32 (≈0.406) 14/32 (≈0.438)
Inch Millimeters Inch Millimeters Inch Millimeters Stimpson Trade Stimpson Trade Stimpson Trade Stimpson Trade Stimpson Trade Stimpson Trade Stimpson Trade Stimpson Trade Stimpson Trade Stimpson Trade Stimpson Trade Stimpson Trade Stimpson Trade
2 0.059 ≈1.499 0.105 ≈2.667 0.007 ≈0.178 GS2‑2 S‑4 GS2‑3 S‑5 GS2‑4 S‑6 GS2‑5 S‑7 GS2‑6 S‑8 GS2‑7 S‑9
3 0.089 ≈2.261 0.15 ≈3.810 0.009 ≈0.229 GS3‑3 L‑11 GS3‑4 L‑12 GS3‑5 L‑12L GS3‑6 L‑13 GS3‑7 L‑14 GS3‑8 L‑15 GS3‑9 L‑16 GS3‑10 L‑17 GS3‑11 L‑18 GS3‑12 L‑19
4 0.121 ≈3.073 0.2 ≈5.080 0.0095 ≈0.241 GS4‑3 S‑14 GS4‑4 S‑15 GS4‑5 S‑16 GS4‑6 S‑17 GS4‑7 S‑18 GS4‑8 S‑18L GS4‑9 S‑18XL GS4‑10 S‑19 GS4‑11 S‑20 GS4‑12 S‑21
5 0.152 ≈3.861 0.245 ≈6.223 0.01 ≈0.254 GS5‑3 S‑23 GS5‑4 S‑24 GS5‑5 S‑25 GS5‑6 S‑26 GS5‑7 S‑27 GS5‑8 S‑28 GS5‑9 S‑28L GS5‑10 S‑29 GS5‑11 S‑30 GS5‑12 S‑31
6 0.183 ≈4.648 0.29 ≈7.366 0.0105 ≈0.267 GS6‑3 S‑32 GS6‑4 S‑33 GS6‑5 S‑34 GS6‑6 S‑35 GS6‑7 S‑36 GS6‑8 S‑37 GS6‑9 S‑38 GS6‑10 S‑39 GS6‑11 S‑40 GS6‑12 S‑41 GS6‑13 S‑42 GS6‑14
7 0.215 ≈5.461 0.34 ≈8.636 0.011 ≈0.279 GS7‑3 S‑43 GS7‑4 S‑44 GS7‑5 S‑45 GS7‑6 S‑46 GS7‑7 S‑47 GS7‑8 S‑48 GS7‑9 S‑49 GS7‑10 S‑50 GS7‑11 S‑51 GS7‑12 S‑52 GS7‑13 S‑53 GS7‑14 S‑54
8 0.246 ≈6.248 0.385 ≈9.779 0.011 ≈0.279 GS8‑3 S‑55 GS8‑4 S‑56 GS8‑5 S‑57 GS8‑6 S‑58 GS8‑7 S‑59 GS8‑8 S‑60 GS8‑9 S‑61 GS8‑10 S‑62 GS8‑11 S‑63 GS8‑12 S‑64 GS8‑13 S‑65 GS8‑14 S‑66

Trademark

US Application Serial Number 77134278, Registration Number 3347585

Entries Linking Here